Receive only a wchar_t in tchar()

It makes simpler the conversion from utf8 input string and
makes simpler the checks done in tputc, but it still requires
a lot of additional conversions that will be removed later.

FAQ

@@ -37,23 +37,23 @@ Taken from the terminfo manpage:
 	are pressed, this information can be given. Note that it is not
 	possible to handle terminals where the keypad only works in
 	local (this applies, for example, to the unshifted HP 2621 keys).
-	If the keypad can be set to transmit or not transmit, tive these
+	If the keypad can be set to transmit or not transmit, give these
 	codes as smkx and rmkx. Otherwise the keypad is assumed to
 	always transmit.
 
 In the st case smkx=E[?1hE= and rmkx=E[?1lE>, so it is mandatory that
-applications which want to test against keypad keys, have to send these
+applications which want to test against keypad keys send these
 sequences.
 
-But buggy applications like bash and irssi for example don't do this. A fast
+But buggy applications (like bash and irssi, for example) don't do this. A fast
 solution for them is to use the following command:
 
-	$ printf "\033?1h\033=" >/dev/tty
+	$ printf '\033[?1h\033=' >/dev/tty
 
 or
 	$ echo $(tput smkx) >/dev/tty
 
-In the case of bash readline is used. Readline has a different note in its
+In the case of bash, readline is used. Readline has a different note in its
 manpage about this issue:
 
 	enable-keypad (Off)
@@ -84,8 +84,74 @@ If you are using zsh, then read the zsh FAQ
 
 Putting these lines into your .zshrc will fix the problems.
 
-## How can use meta in 8bit mode?
+## How can I use meta in 8bit mode?
 
- St support meta in 8bit mode, but the default terminfo entry doesn't
- use this capability. If you want it, you have to use st-meta value
+ St supports meta in 8bit mode, but the default terminfo entry doesn't
+ use this capability. If you want it, you have to use the 'st-meta' value
  in TERM.
+
+## I cannot compile st in OpenBSD
+
+OpenBSD lacks of librt, despite it begin mandatory in POSIX
+<http://pubs.opengroup.org/onlinepubs/9699919799/utilities/c99.html#tag_20_11_13>.
+If you want to compile st for OpenBSD you have to remove -lrt from config.mk, and
+st will compile without any loss of functionality, because all the functions are
+included in libc on this platform.
+
+## Backspace key does not work
+
+This is an issue that was discussed in suckless mailing list
+<http://lists.suckless.org/dev/1404/20697.html>:
+
+	Well, I am going to comment why I want to change the behaviour
+	of this key. When ASCII was defined in 1968, communication
+	with computers was done using punched cards, or hardcopy
+	terminals (basically a typewriter machine connected with the
+	computer using a serial port).  ASCII defines DELETE as 7F,
+	because, in punched-card terms, it means all the holes of the
+	card punched; it is thus a kind of 'physical delete'. In the
+	same way, the BACKSPACE key was a non-destructive backspace,
+	as on a typewriter.  So, if you wanted to delete a character,
+	you had to BACKSPACE and then DELETE.  Another use of BACKSPACE
+	was to type accented characters, for example 'a BACKSPACE `'.
+	The VT100 had no BACKSPACE key; it was generated using the
+	CONTROL key as another control character (CONTROL key sets to
+	0 b7 b6 b5, so it converts H (code 0x48) into BACKSPACE (code
+	0x08)), but it had a DELETE key in a similar position where
+	the BACKSPACE key is located today on common PC keyboards.
+	All the terminal emulators emulated the difference between
+	these keys correctly: the backspace key generated a BACKSPACE
+	(^H) and delete key generated a DELETE (^?).
+
+	But a problem arose when Linus Torvalds wrote Linux. Unlike
+	earlier terminals, the Linux virtual terminal (the terminal
+	emulator integrated in the kernel) returned a DELETE when
+	backspace was pressed, due to the VT100 having a DELETE key in
+	the same position.  This created a lot of problems (see [1]
+	and [2]). Since Linux has become the king, a lot of terminal
+	emulators today generate a DELETE when the backspace key is
+	pressed in order to avoid problems with Linux. The result is
+	that the only way of generating a BACKSPACE on these systems
+	is by using CONTROL + H. (I also think that emacs had an
+	important point here because the CONTROL + H prefix is used
+	in emacs in some commands (help commands).)
+
+	From point of view of the kernel, you can change the key
+	for deleting a previous character with stty erase. When you
+	connect a real terminal into a machine you describe the type
+	of terminal, so getty configures the correct value of stty
+	erase for this terminal. In the case of terminal emulators,
+	however, you don't have any getty that can set the correct
+	value of stty erase, so you always get the default value.
+	For this reason, it is necessary to add 'stty erase ^H' to your
+	profile if you have changed the value of the backspace key.
+	Of course, another solution is for st itself to modify the
+	value of stty erase.  I usually have the inverse problem:
+	when I connect to non-Unix machines, I have to press CONTROL +
+	h to get a BACKSPACE. The inverse problem occurs when a user
+	connects to my Unix machines from a different system with a
+	correct backspace key.
+
+	[1] http://www.ibb.net/~anne/keyboard.html
+	[2] http://www.tldp.org/HOWTO/Keyboard-and-Console-HOWTO-5.html
+

LICENSE

@@ -1,15 +1,16 @@
 MIT/X Consortium License
 
-© 2009-2012 Aurélien APTEL <aurelien dot aptel at gmail dot com> 
+© 2009-2012 Aurélien APTEL <aurelien dot aptel at gmail dot com>
 © 2009 Anselm R Garbe <garbeam at gmail dot com>
-© 2012 Roberto E. Vargas Caballero <k0ga at shike2 dot com>
-© 2012 Christoph Lohmann <20h at r-36 dot net>
+© 2012-2014 Roberto E. Vargas Caballero <k0ga at shike2 dot com>
+© 2012-2014 Christoph Lohmann <20h at r-36 dot net>
 © 2013 Eon S. Jeon <esjeon at hyunmu dot am>
 © 2013 Alexander Sedov <alex0player at gmail dot com>
 © 2013 Mark Edgar <medgar123 at gmail dot com>
 © 2013 Eric Pruitt <eric.pruitt at gmail dot com>
 © 2013 Michael Forney <mforney at mforney dot org>
-© 2013 Markus Teich <markus dot teich at stusta dot mhn dot de>
+© 2013-2014 Markus Teich <markus dot teich at stusta dot mhn dot de>
+© 2014 Laslo Hunhold <dev at frign dot de>
 
 Permission is hereby granted, free of charge, to any person obtaining a
 copy of this software and associated documentation files (the "Software"),

README

@@ -1,6 +1,6 @@
 st - simple terminal
 --------------------
-st is a simple virtual terminal emulator for X which sucks less.
+st is a simple terminal emulator for X which sucks less.
 
 
 Requirements

TODO

@@ -12,6 +12,7 @@ drawing
 -------
 * add diacritics support to xdraws()
 * make the font cache simpler
+* add better support for brightening of the upper colors
 
 bugs
 ----

config.def.h

@@ -8,10 +8,14 @@
 static char font[] = "Liberation Mono:pixelsize=12:antialias=false:autohint=false";
 static int borderpx = 2;
 static char shell[] = "/bin/sh";
+static char *utmp = NULL;
 
-/* Kerning / character bounding-box mutlipliers */
-float cwscale = 1.0;
-float chscale = 1.0;
+/* identification sequence returned in DA and DECID */
+static char vtiden[] = "\033[?6c";
+
+/* Kerning / character bounding-box multipliers */
+static float cwscale = 1.0;
+static float chscale = 1.0;
 
 /*
  * word delimiter string
@@ -137,7 +141,7 @@ static Shortcut shortcuts[] = {
  * * > 0: crlf mode is enabled
  * * < 0: crlf mode is disabled
  *
- * Be careful with the order of the definitons because st searchs in
+ * Be careful with the order of the definitions because st searches in
  * this table sequentially, so any XK_ANY_MOD must be in the last
  * position for a key.
  */
@@ -154,6 +158,11 @@ static KeySym mappedkeys[] = { -1 };
  */
 static uint ignoremod = Mod2Mask|XK_SWITCH_MOD;
 
+/* Override mouse-select while mask is active (when MODE_MOUSE is set).
+ * Note that if you want to use ShiftMask with selmasks, set this to an other
+ * modifier, set to 0 to not use it. */
+static uint forceselmod = ShiftMask;
+
 static Key key[] = {
 	/* keysym           mask            string      appkey appcursor crlf */
 	{ XK_KP_Home,       ShiftMask,      "\033[2J",       0,   -1,    0},
@@ -193,7 +202,7 @@ static Key key[] = {
 	{ XK_KP_Delete,     ShiftMask,      "\033[2K",      -1,    0,    0},
 	{ XK_KP_Delete,     ShiftMask,      "\033[3;2~",    +1,    0,    0},
 	{ XK_KP_Delete,     XK_ANY_MOD,     "\033[P",       -1,    0,    0},
-	{ XK_KP_Delete,     XK_ANY_MOD,     "\033[3~",      +1,    0,    0},
+	{ XK_KP_Delete,     XK_ANY_MOD,     "\177",         +1,    0,    0},
 	{ XK_KP_Multiply,   XK_ANY_MOD,     "\033Oj",       +2,    0,    0},
 	{ XK_KP_Add,        XK_ANY_MOD,     "\033Ok",       +2,    0,    0},
 	{ XK_KP_Enter,      XK_ANY_MOD,     "\033OM",       +2,    0,    0},
@@ -212,7 +221,6 @@ static Key key[] = {
 	{ XK_KP_7,          XK_ANY_MOD,     "\033Ow",       +2,    0,    0},
 	{ XK_KP_8,          XK_ANY_MOD,     "\033Ox",       +2,    0,    0},
 	{ XK_KP_9,          XK_ANY_MOD,     "\033Oy",       +2,    0,    0},
-	{ XK_BackSpace,     XK_NO_MOD,      "\177",          0,    0,    0},
 	{ XK_Up,            ShiftMask,      "\033[1;2A",     0,    0,    0},
 	{ XK_Up,            ControlMask,    "\033[1;5A",     0,    0,    0},
 	{ XK_Up,            Mod1Mask,       "\033[1;3A",     0,    0,    0},
@@ -249,7 +257,7 @@ static Key key[] = {
 	{ XK_Delete,        ShiftMask,      "\033[2K",      -1,    0,    0},
 	{ XK_Delete,        ShiftMask,      "\033[3;2~",    +1,    0,    0},
 	{ XK_Delete,        XK_ANY_MOD,     "\033[P",       -1,    0,    0},
-	{ XK_Delete,        XK_ANY_MOD,     "\033[3~",      +1,    0,    0},
+	{ XK_Delete,        XK_ANY_MOD,     "\177",         +1,    0,    0},
 	{ XK_Home,          ShiftMask,      "\033[2J",       0,   -1,    0},
 	{ XK_Home,          ShiftMask,      "\033[1;2H",     0,   +1,    0},
 	{ XK_Home,          XK_ANY_MOD,     "\033[H",        0,   -1,    0},
@@ -360,7 +368,6 @@ static Key key[] = {
  * ButtonRelease and MotionNotify.
  * If no match is found, regular selection is used.
  */
-
 static uint selmasks[] = {
 	[SEL_RECTANGULAR] = Mod1Mask,
 };

config.mk

@@ -14,7 +14,7 @@ X11LIB = /usr/X11R6/lib
 INCS = -I. -I/usr/include -I${X11INC} \
        `pkg-config --cflags fontconfig` \
        `pkg-config --cflags freetype2`
-LIBS = -L/usr/lib -lc -L${X11LIB} -lX11 -lutil -lXext -lXft \
+LIBS = -L/usr/lib -lc -L${X11LIB} -lm -lrt -lX11 -lutil -lXext -lXft \
        `pkg-config --libs fontconfig`  \
        `pkg-config --libs freetype2`
 

st.1

@@ -10,6 +10,7 @@ st \- simple terminal
 .IR font ]
 .RB [ \-g
 .IR geometry ]
+.RB [ \-i ]
 .RB [ \-o
 .IR file ]
 .RB [ \-t 
@@ -36,11 +37,14 @@ defines the
 to use when st is run.
 .TP
 .BI \-g " geometry"
-defines the X11 geometry string, which will fixate the height and width of st. 
-The form is [=][<width>{xX}<height>][{+-}<xoffset>{+-}<yoffset>]. See
+defines the X11 geometry string.
+The form is [=][<cols>{xX}<rows>][{+-}<xoffset>{+-}<yoffset>]. See
 .BR XParseGeometry (3)
 for further details.
 .TP
+.B \-i
+will fixate the position given with the -g option.
+.TP
 .BI \-o " file"
 writes all the I/O to
 .I file.

st.info

@@ -53,7 +53,7 @@ st| simpleterm,
 	ka3=\E[5~,
 	kc1=\E[4~,
 	kc3=\E[6~,
-	kbs=\177,
+	kbs=\010,
 	kcbt=\E[Z,
 	kb2=\EOu,
 	kcub1=\EOD,
@@ -73,7 +73,7 @@ st| simpleterm,
 	kri=\E[1;2A,
 	kclr=\E[3;5~,
 	kdl1=\E[3;2~,
-	kdch1=\E[3~,
+	kdch1=\0177,
 	kich1=\E[2~,
 	kend=\E[4~,
 	kf1=\EOP,
@@ -183,7 +183,6 @@ st| simpleterm,
 	smul=\E[4m,
 	tbc=\E[3g,
 	tsl=\E]0;,
-	ul,
 	xenl,
 	vpa=\E[%i%p1%dd,