0.7 release

If you don't make sure that the terminal does not expand tabs to spaces, of
course such a setting won't work.

FAQ

@@ -37,23 +37,23 @@ Taken from the terminfo manpage:
 	are pressed, this information can be given. Note that it is not
 	possible to handle terminals where the keypad only works in
 	local (this applies, for example, to the unshifted HP 2621 keys).
-	If the keypad can be set to transmit or not transmit, tive these
+	If the keypad can be set to transmit or not transmit, give these
 	codes as smkx and rmkx. Otherwise the keypad is assumed to
 	always transmit.
 
 In the st case smkx=E[?1hE= and rmkx=E[?1lE>, so it is mandatory that
-applications which want to test against keypad keys, have to send these
+applications which want to test against keypad keys send these
 sequences.
 
-But buggy applications like bash and irssi for example don't do this. A fast
+But buggy applications (like bash and irssi, for example) don't do this. A fast
 solution for them is to use the following command:
 
-	$ printf "\033?1h\033=" >/dev/tty
+	$ printf '\033[?1h\033=' >/dev/tty
 
 or
-	$ echo $(tput smkx) >/dev/tty
+	$ tput smkx
 
-In the case of bash readline is used. Readline has a different note in its
+In the case of bash, readline is used. Readline has a different note in its
 manpage about this issue:
 
 	enable-keypad (Off)
@@ -84,8 +84,84 @@ If you are using zsh, then read the zsh FAQ
 
 Putting these lines into your .zshrc will fix the problems.
 
-## How can use meta in 8bit mode?
+## How can I use meta in 8bit mode?
+
+St supports meta in 8bit mode, but the default terminfo entry doesn't
+use this capability. If you want it, you have to use the 'st-meta' value
+in TERM.
+
+## I cannot compile st in OpenBSD
+
+OpenBSD lacks librt, despite it being mandatory in POSIX
+<http://pubs.opengroup.org/onlinepubs/9699919799/utilities/c99.html#tag_20_11_13>.
+If you want to compile st for OpenBSD you have to remove -lrt from config.mk, and
+st will compile without any loss of functionality, because all the functions are
+included in libc on this platform.
+
+## The Backspace Case
+
+St is emulating the Linux way of handling backspace being delete and delete being
+backspace.
+
+This is an issue that was discussed in suckless mailing list
+<http://lists.suckless.org/dev/1404/20697.html>. Here is why some old grumpy
+terminal users wants its backspace to be how he feels it:
+
+	Well, I am going to comment why I want to change the behaviour
+	of this key. When ASCII was defined in 1968, communication
+	with computers was done using punched cards, or hardcopy
+	terminals (basically a typewriter machine connected with the
+	computer using a serial port).  ASCII defines DELETE as 7F,
+	because, in punched-card terms, it means all the holes of the
+	card punched; it is thus a kind of 'physical delete'. In the
+	same way, the BACKSPACE key was a non-destructive backspace,
+	as on a typewriter.  So, if you wanted to delete a character,
+	you had to BACKSPACE and then DELETE.  Another use of BACKSPACE
+	was to type accented characters, for example 'a BACKSPACE `'.
+	The VT100 had no BACKSPACE key; it was generated using the
+	CONTROL key as another control character (CONTROL key sets to
+	0 b7 b6 b5, so it converts H (code 0x48) into BACKSPACE (code
+	0x08)), but it had a DELETE key in a similar position where
+	the BACKSPACE key is located today on common PC keyboards.
+	All the terminal emulators emulated the difference between
+	these keys correctly: the backspace key generated a BACKSPACE
+	(^H) and delete key generated a DELETE (^?).
+
+	But a problem arose when Linus Torvalds wrote Linux. Unlike
+	earlier terminals, the Linux virtual terminal (the terminal
+	emulator integrated in the kernel) returned a DELETE when
+	backspace was pressed, due to the VT100 having a DELETE key in
+	the same position.  This created a lot of problems (see [1]
+	and [2]). Since Linux has become the king, a lot of terminal
+	emulators today generate a DELETE when the backspace key is
+	pressed in order to avoid problems with Linux. The result is
+	that the only way of generating a BACKSPACE on these systems
+	is by using CONTROL + H. (I also think that emacs had an
+	important point here because the CONTROL + H prefix is used
+	in emacs in some commands (help commands).)
+
+	From point of view of the kernel, you can change the key
+	for deleting a previous character with stty erase. When you
+	connect a real terminal into a machine you describe the type
+	of terminal, so getty configures the correct value of stty
+	erase for this terminal. In the case of terminal emulators,
+	however, you don't have any getty that can set the correct
+	value of stty erase, so you always get the default value.
+	For this reason, it is necessary to add 'stty erase ^H' to your
+	profile if you have changed the value of the backspace key.
+	Of course, another solution is for st itself to modify the
+	value of stty erase.  I usually have the inverse problem:
+	when I connect to non-Unix machines, I have to press CONTROL +
+	h to get a BACKSPACE. The inverse problem occurs when a user
+	connects to my Unix machines from a different system with a
+	correct backspace key.
+
+	[1] http://www.ibb.net/~anne/keyboard.html
+	[2] http://www.tldp.org/HOWTO/Keyboard-and-Console-HOWTO-5.html
+
+## But I really want the old grumpy behaviour of my terminal
+
+Apply [1].
+
+[1] http://st.suckless.org/patches/delkey
 
- St support meta in 8bit mode, but the default terminfo entry doesn't
- use this capability. If you want it, you have to use st-meta value
- in TERM.

LICENSE

@@ -1,15 +1,16 @@
 MIT/X Consortium License
 
-© 2009-2012 Aurélien APTEL <aurelien dot aptel at gmail dot com> 
+© 2009-2012 Aurélien APTEL <aurelien dot aptel at gmail dot com>
 © 2009 Anselm R Garbe <garbeam at gmail dot com>
-© 2012 Roberto E. Vargas Caballero <k0ga at shike2 dot com>
+© 2012-2015 Roberto E. Vargas Caballero <k0ga at shike2 dot com>
-© 2012 Christoph Lohmann <20h at r-36 dot net>
+© 2012-2015 Christoph Lohmann <20h at r-36 dot net>
 © 2013 Eon S. Jeon <esjeon at hyunmu dot am>
 © 2013 Alexander Sedov <alex0player at gmail dot com>
 © 2013 Mark Edgar <medgar123 at gmail dot com>
 © 2013 Eric Pruitt <eric.pruitt at gmail dot com>
 © 2013 Michael Forney <mforney at mforney dot org>
-© 2013 Markus Teich <markus dot teich at stusta dot mhn dot de>
+© 2013-2014 Markus Teich <markus dot teich at stusta dot mhn dot de>
+© 2014-2015 Laslo Hunhold <dev at frign dot de>
 
 Permission is hereby granted, free of charge, to any person obtaining a
 copy of this software and associated documentation files (the "Software"),

Makefile

@@ -34,7 +34,7 @@ clean:
 dist: clean
 	@echo creating dist tarball
 	@mkdir -p st-${VERSION}
-	@cp -R LICENSE Makefile README config.mk config.def.h st.info st.1 ${SRC} st-${VERSION}
+	@cp -R LICENSE Makefile README config.mk config.def.h st.info st.1 arg.h ${SRC} st-${VERSION}
 	@tar -cf st-${VERSION}.tar st-${VERSION}
 	@gzip st-${VERSION}.tar
 	@rm -rf st-${VERSION}

README

@@ -1,6 +1,6 @@
 st - simple terminal
 --------------------
-st is a simple virtual terminal emulator for X which sucks less.
+st is a simple terminal emulator for X which sucks less.
 
 
 Requirements

TODO

@@ -11,13 +11,14 @@ code & interface
 drawing
 -------
 * add diacritics support to xdraws()
+	* switch to a suckless font drawing library
 * make the font cache simpler
+* add better support for brightening of the upper colors
 
 bugs
 ----
 
 * fix shift up/down (shift selection in emacs)
-* fix -e handling
 * remove DEC test sequence when appropriate
 
 misc

arg.h

@@ -10,8 +10,8 @@ extern char *argv0;
 
 /* use main(int argc, char *argv[]) */
 #define ARGBEGIN	for (argv0 = *argv, argv++, argc--;\
-					argv[0] && argv[0][1]\
+					argv[0] && argv[0][0] == '-'\
-					&& argv[0][0] == '-';\
+					&& argv[0][1];\
 					argc--, argv++) {\
 				char argc_;\
 				char **argv_;\
@@ -28,26 +28,11 @@ extern char *argv0;
 						break;\
 					argc_ = argv[0][0];\
 					switch (argc_)
-
-/* Handles obsolete -NUM syntax */
-#define ARGNUM				case '0':\
-					case '1':\
-					case '2':\
-					case '3':\
-					case '4':\
-					case '5':\
-					case '6':\
-					case '7':\
-					case '8':\
-					case '9'
-
 #define ARGEND			}\
 			}
 
 #define ARGC()		argc_
 
-#define ARGNUMF(base)	(brk_ = 1, estrtol(argv[0], (base)))
-
 #define EARGF(x)	((argv[0][1] == '\0' && argv[1] == NULL)?\
 				((x), abort(), (char *)0) :\
 				(brk_ = 1, (argv[0][1] != '\0')?\

config.def.h

@@ -5,13 +5,27 @@
  *
  * font: see http://freedesktop.org/software/fontconfig/fontconfig-user.html
  */
-static char font[] = "Liberation Mono:pixelsize=12:antialias=false:autohint=false";
+static char font[] = "Liberation Mono:pixelsize=12:antialias=true:autohint=true";
 static int borderpx = 2;
-static char shell[] = "/bin/sh";
 
-/* Kerning / character bounding-box mutlipliers */
+/*
-float cwscale = 1.0;
+ * What program is execed by st depends of these precedence rules:
-float chscale = 1.0;
+ * 1: program passed with -e
+ * 2: utmp option
+ * 3: SHELL environment variable
+ * 4: value of shell in /etc/passwd
+ * 5: value of shell in config.h
+ */
+static char shell[] = "/bin/sh";
+static char *utmp = NULL;
+static char stty_args[] = "stty raw pass8 nl -echo -iexten -cstopb 38400";
+
+/* identification sequence returned in DA and DECID */
+static char vtiden[] = "\033[?6c";
+
+/* Kerning / character bounding-box multipliers */
+static float cwscale = 1.0;
+static float chscale = 1.0;
 
 /*
  * word delimiter string
@@ -25,7 +39,7 @@ static unsigned int doubleclicktimeout = 300;
 static unsigned int tripleclicktimeout = 600;
 
 /* alt screens */
-static bool allowaltscreen = true;
+static int allowaltscreen = 1;
 
 /* frames per second st should at maximum draw to the screen */
 static unsigned int xfps = 120;
@@ -37,18 +51,37 @@ static unsigned int actionfps = 30;
  */
 static unsigned int blinktimeout = 800;
 
+/*
+ * thickness of underline and bar cursors
+ */
+static unsigned int cursorthickness = 2;
+
 /*
  * bell volume. It must be a value between -100 and 100. Use 0 for disabling
  * it
  */
 static int bellvolume = 0;
 
-/* TERM value */
+/* default TERM value */
 static char termname[] = "st-256color";
 
+/*
+ * spaces per tab
+ *
+ * When you are changing this value, don't forget to adapt the »it« value in
+ * the st.info and appropriately install the st.info in the environment where
+ * you use this st version.
+ *
+ *	it#$tabspaces,
+ *
+ * Secondly make sure your kernel is not expanding tabs. When running `stty
+ * -a` »tab0« should appear. You can tell the terminal to not expand tabs by
+ *  running following command:
+ *
+ *	stty tabs
+ */
 static unsigned int tabspaces = 8;
 
-
 /* Terminal colors (16 first used in escape sequence) */
 static const char *colorname[] = {
 	/* 8 normal colors */
@@ -75,16 +108,34 @@ static const char *colorname[] = {
 
 	/* more colors can be added after 255 to use with DefaultXX */
 	"#cccccc",
+	"#555555",
 };
 
 
 /*
  * Default colors (colorname index)
- * foreground, background, cursor
+ * foreground, background, cursor, reverse cursor
  */
 static unsigned int defaultfg = 7;
 static unsigned int defaultbg = 0;
 static unsigned int defaultcs = 256;
+static unsigned int defaultrcs = 257;
+
+/*
+ * Default shape of cursor
+ * 2: Block ("█")
+ * 4: Underline ("_")
+ * 6: Bar ("|")
+ * 7: Snowman ("☃")
+ */
+static unsigned int cursorshape = 2;
+
+/*
+ * Default colour and shape of the mouse cursor
+ */
+static unsigned int mouseshape = XC_xterm;
+static unsigned int mousefg = 7;
+static unsigned int mousebg = 0;
 
 /*
  * Colors used, when the specific fg == defaultfg. So in reverse mode this
@@ -94,9 +145,11 @@ static unsigned int defaultcs = 256;
 static unsigned int defaultitalic = 11;
 static unsigned int defaultunderline = 7;
 
-/* Internal mouse shortcuts. */
+/*
-/* Beware that overloading Button1 will disable the selection. */
+ * Internal mouse shortcuts.
-static Mousekey mshortcuts[] = {
+ * Beware that overloading Button1 will disable the selection.
+ */
+static MouseShortcut mshortcuts[] = {
 	/* button               mask            string */
 	{ Button4,              XK_ANY_MOD,     "\031" },
 	{ Button5,              XK_ANY_MOD,     "\005" },
@@ -107,13 +160,17 @@ static Mousekey mshortcuts[] = {
 
 static Shortcut shortcuts[] = {
 	/* mask                 keysym          function        argument */
+	{ XK_ANY_MOD,           XK_Break,       sendbreak,      {.i =  0} },
 	{ ControlMask,          XK_Print,       toggleprinter,  {.i =  0} },
 	{ ShiftMask,            XK_Print,       printscreen,    {.i =  0} },
 	{ XK_ANY_MOD,           XK_Print,       printsel,       {.i =  0} },
-	{ MODKEY|ShiftMask,     XK_Prior,       xzoom,          {.i = +1} },
+	{ MODKEY|ShiftMask,     XK_Prior,       xzoom,          {.f = +1} },
-	{ MODKEY|ShiftMask,     XK_Next,        xzoom,          {.i = -1} },
+	{ MODKEY|ShiftMask,     XK_Next,        xzoom,          {.f = -1} },
+	{ MODKEY|ShiftMask,     XK_Home,        xzoomreset,     {.f =  0} },
 	{ ShiftMask,            XK_Insert,      selpaste,       {.i =  0} },
 	{ MODKEY|ShiftMask,     XK_Insert,      clippaste,      {.i =  0} },
+	{ MODKEY|ShiftMask,     XK_C,           clipcopy,       {.i =  0} },
+	{ MODKEY|ShiftMask,     XK_V,           clippaste,      {.i =  0} },
 	{ MODKEY,               XK_Num_Lock,    numlock,        {.i =  0} },
 };
 
@@ -137,7 +194,7 @@ static Shortcut shortcuts[] = {
  * * > 0: crlf mode is enabled
  * * < 0: crlf mode is disabled
  *
- * Be careful with the order of the definitons because st searchs in
+ * Be careful with the order of the definitions because st searches in
  * this table sequentially, so any XK_ANY_MOD must be in the last
  * position for a key.
  */
@@ -154,6 +211,17 @@ static KeySym mappedkeys[] = { -1 };
  */
 static uint ignoremod = Mod2Mask|XK_SWITCH_MOD;
 
+/*
+ * Override mouse-select while mask is active (when MODE_MOUSE is set).
+ * Note that if you want to use ShiftMask with selmasks, set this to an other
+ * modifier, set to 0 to not use it.
+ */
+static uint forceselmod = ShiftMask;
+
+/*
+ * This is the huge key array which defines all compatibility to the Linux
+ * world. Please decide about changes wisely.
+ */
 static Key key[] = {
 	/* keysym           mask            string      appkey appcursor crlf */
 	{ XK_KP_Home,       ShiftMask,      "\033[2J",       0,   -1,    0},
@@ -212,7 +280,6 @@ static Key key[] = {
 	{ XK_KP_7,          XK_ANY_MOD,     "\033Ow",       +2,    0,    0},
 	{ XK_KP_8,          XK_ANY_MOD,     "\033Ox",       +2,    0,    0},
 	{ XK_KP_9,          XK_ANY_MOD,     "\033Oy",       +2,    0,    0},
-	{ XK_BackSpace,     XK_NO_MOD,      "\177",          0,    0,    0},
 	{ XK_Up,            ShiftMask,      "\033[1;2A",     0,    0,    0},
 	{ XK_Up,            ControlMask,    "\033[1;5A",     0,    0,    0},
 	{ XK_Up,            Mod1Mask,       "\033[1;3A",     0,    0,    0},
@@ -250,6 +317,8 @@ static Key key[] = {
 	{ XK_Delete,        ShiftMask,      "\033[3;2~",    +1,    0,    0},
 	{ XK_Delete,        XK_ANY_MOD,     "\033[P",       -1,    0,    0},
 	{ XK_Delete,        XK_ANY_MOD,     "\033[3~",      +1,    0,    0},
+	{ XK_BackSpace,     XK_NO_MOD,      "\177",          0,    0,    0},
+	{ XK_BackSpace,     Mod1Mask,       "\033\177",      0,    0,    0},
 	{ XK_Home,          ShiftMask,      "\033[2J",       0,   -1,    0},
 	{ XK_Home,          ShiftMask,      "\033[1;2H",     0,   +1,    0},
 	{ XK_Home,          XK_ANY_MOD,     "\033[H",        0,   -1,    0},
@@ -360,8 +429,16 @@ static Key key[] = {
  * ButtonRelease and MotionNotify.
  * If no match is found, regular selection is used.
  */
-
 static uint selmasks[] = {
 	[SEL_RECTANGULAR] = Mod1Mask,
 };
 
+/*
+ * Printable characters in ASCII, used to estimate the advance width
+ * of single wide characters.
+ */
+static char ascii_printable[] =
+	" !\"#$%&'()*+,-./0123456789:;<=>?"
+	"@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_"
+	"`abcdefghijklmnopqrstuvwxyz{|}~";
+

config.mk

@@ -1,5 +1,5 @@
 # st version
-VERSION = 0.5
+VERSION = 0.7
 
 # Customize below to fit your system
 
@@ -14,15 +14,15 @@ X11LIB = /usr/X11R6/lib
 INCS = -I. -I/usr/include -I${X11INC} \
        `pkg-config --cflags fontconfig` \
        `pkg-config --cflags freetype2`
-LIBS = -L/usr/lib -lc -L${X11LIB} -lX11 -lutil -lXext -lXft \
+LIBS = -L/usr/lib -lc -L${X11LIB} -lm -lrt -lX11 -lutil -lXft \
        `pkg-config --libs fontconfig`  \
        `pkg-config --libs freetype2`
 
 # flags
-CPPFLAGS = -DVERSION=\"${VERSION}\" -D_BSD_SOURCE -D_XOPEN_SOURCE=600
+CPPFLAGS = -DVERSION=\"${VERSION}\" -D_XOPEN_SOURCE=600
 CFLAGS += -g -std=c99 -pedantic -Wall -Wvariadic-macros -Os ${INCS} ${CPPFLAGS}
 LDFLAGS += -g ${LIBS}
 
 # compiler and linker
-CC ?= cc
+# CC = cc
 

st.1

@@ -3,22 +3,50 @@
 st \- simple terminal
 .SH SYNOPSIS
 .B st
-.RB [ \-a ]
+.RB [ \-aiv ]
 .RB [ \-c
 .IR class ]
 .RB [ \-f
 .IR font ]
 .RB [ \-g
 .IR geometry ]
+.RB [ \-n
+.IR name ]
 .RB [ \-o
-.IR file ]
+.IR iofile ]
-.RB [ \-t 
+.RB [ \-T
 .IR title ]
-.RB [ \-w 
+.RB [ \-t
+.IR title ]
+.RB [ \-l
+.IR line ]
+.RB [ \-w
 .IR windowid ]
-.RB [ \-v ]
+.RB [[ \-e ]
-.RB [ \-e
+.IR command
-.IR command ...]
+.RI [ arguments ...]]
+.PP
+.B st
+.RB [ \-aiv ]
+.RB [ \-c
+.IR class ]
+.RB [ \-f
+.IR font ]
+.RB [ \-g
+.IR geometry ]
+.RB [ \-n
+.IR name ]
+.RB [ \-o
+.IR iofile ]
+.RB [ \-T
+.IR title ]
+.RB [ \-t
+.IR title ]
+.RB [ \-w
+.IR windowid ]
+.RB \-l
+.IR line
+.RI [ stty_args ...]
 .SH DESCRIPTION
 .B st
 is a simple terminal emulator.
@@ -36,33 +64,104 @@ defines the
 to use when st is run.
 .TP
 .BI \-g " geometry"
-defines the X11 geometry string, which will fixate the height and width of st. 
+defines the X11 geometry string.
-The form is [=][<width>{xX}<height>][{+-}<xoffset>{+-}<yoffset>]. See
+The form is [=][<cols>{xX}<rows>][{+-}<xoffset>{+-}<yoffset>]. See
 .BR XParseGeometry (3)
 for further details.
 .TP
-.BI \-o " file"
+.B \-i
+will fixate the position given with the -g option.
+.TP
+.BI \-n " name"
+defines the window instance name (default $TERM).
+.TP
+.BI \-o " iofile"
 writes all the I/O to
-.I file.
+.I iofile.
 This feature is useful when recording st sessions. A value of "-" means
 standard output.
 .TP
+.BI \-T " title"
+defines the window title (default 'st').
+.TP
 .BI \-t " title"
 defines the window title (default 'st').
 .TP
 .BI \-w " windowid"
-embeds st within the window identified by 
+embeds st within the window identified by
 .I windowid
 .TP
+.BI \-l " line"
+use a tty
+.I line
+instead of a pseudo terminal.
+.I line
+should be a (pseudo-)serial device (e.g. /dev/ttySO on Linux for serial port
+0).
+When this flag is given
+remaining arguments are used as flags for
+.BR stty(1).
+By default st initializes the serial line to 8 bits, no parity, 1 stop bit
+and a 38400 baud rate. The speed is set by appending it as last argument
+(e.g. 'st -l 115200'). Arguments before the last one are
+.BR stty(1)
+flags. If you want to set odd parity on 115200 baud use for example 'st -l
+parenb parodd 115200'. Set the number of bits by using for example 'st -l cs7
+115200'. See
+.BR stty(1)
+for more arguments and cases.
+.TP
 .B \-v
 prints version information to stderr, then exits.
 .TP
-.BI \-e " program " [ " arguments " "... ]"
+.BI \-e " command " [ " arguments " "... ]"
 st executes
-.I program
+.I command
 instead of the shell.  If this is used it
 .B must be the last option
 on the command line, as in xterm / rxvt.
+This option is only intended for compability,
+and all the remaining arguments are used as a command
+even without it.
+.SH SHORTCUTS
+.TP
+.B Break
+Send a break in the serial line.
+Break key is obtained in PC keyboards
+pressing at the same time control and pause.
+.TP
+.B Ctrl-Print Screen
+Toggle if st should print to the
+.I iofile.
+.TP
+.B Shift-Print Screen
+Print the full screen to the
+.I iofile.
+.TP
+.B Print Screen
+Print the selection to the
+.I iofile.
+.TP
+.B Alt-Shift-Page Up
+Increase font size.
+.TP
+.B Alt-Shift-Page Down
+Decrease font size.
+.TP
+.B Alt-Shift-Home
+Reset to default font size.
+.TP
+.B Shift-Insert
+Paste from primary selection (middle mouse button).
+.TP
+.B Alt-Shift-Insert
+Paste from clipboard selection.
+.TP
+.B Alt-Shift-c
+Copy the selected text to the clipboard selection.
+.TP
+.B Alt-Shift-v
+Paste from the clipboard selection.
 .SH CUSTOMIZATION
 .B st
 can be customized by creating a custom config.h and (re)compiling the source
@@ -72,7 +171,9 @@ See the LICENSE file for the authors.
 .SH LICENSE
 See the LICENSE file for the terms of redistribution.
 .SH SEE ALSO
-.BR tabbed (1)
+.BR tabbed (1),
+.BR utmp (1),
+.BR stty (1)
 .SH BUGS
 See the TODO file in the distribution.
 

st.info

@@ -1,5 +1,5 @@
 st| simpleterm,
-	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	am,
 	bce,
 	bel=^G,
@@ -32,7 +32,7 @@ st| simpleterm,
 	el=\E[K,
 	el1=\E[1K,
 	enacs=\E)0,
-	flash=\E[?5h\E[?5l,
+	flash=\E[?5h$<80/>\E[?5l,
 	fsl=^G,
 	home=\E[H,
 	hpa=\E[%i%p1%dG,
@@ -150,6 +150,7 @@ st| simpleterm,
 	mir,
 	msgr,
 	ncv#3,
+	npc,
 	op=\E[39;49m,
 	pairs#64,
 	mc0=\E[i,
@@ -183,7 +184,6 @@ st| simpleterm,
 	smul=\E[4m,
 	tbc=\E[3g,
 	tsl=\E]0;,
-	ul,
 	xenl,
 	vpa=\E[%i%p1%dd,